MODULAR MS5
Designed for Flexible Chassis
The Genmark Modular Genset is designed for flexible / sliding skeletal trailers and is positioned on the left or right side of the trailer (depending on your needs). Unique about the Genmark Modular Genset is the approved (RDW) function as a lateral protection device. The design results in a strong unit with less weight and a higher ground clearance than previous models.
Specifications
Brochures
Compatible Chassis
Engine type + size
Yanmar 4TNV88-BIGV (Stage V)
2.286 liter
Outer dimensions
(cm/Inch) L: 114/44 x W: 102/40 x H: 67/26
Battery
12V 74Ah Cold: 680 EN
Certification
EMC, Lateral protection, Stage V
Oil Capacity
13,3 liter (max)
Average Fuel Consumption
2,20 liter per hour @ 380V/50Hz output
1,14 liter per hour when idle
Power
24 kW @ 1500 RPM
Weight
476 kg / 1.049 lb
Engine type + size
Yanmar 4TNV88-BIGV (Stage V)
2.286 liter
Outer dimensions
(cm/Inch) L: 114/44 x W: 102/40 x H: 67/26
Battery
12V 74Ah Cold: 680 EN
Certification
EMC, Lateral Protection, Stage V
Oil Capacity
13,3 liter (max)
Average Fuel Consumption
2,20 liter per hour @ 380V/50Hz output
1,14 liter per hour when idle
Power
50Hz / 24 kW
Weight
476 kg / 1.049 lb
English
D-TEC Flexitrailer S-Line
Pacton Flex
Krone Box Liner TU70
Broshuis MFCCHD
Kässbohrer
360 viewer
THE MOST INNOVATING UNIT AVAILABLE
Designed for Flexible Chassis
It can be quite challenging to mount a generator on your sliding or flexible chassis. As the sliding mechanism often runs through the centre of the chassis, the genset needs to be positioned at the side of the chassis. Our technical engineers at Genmark have found a solution for almost any type of flexible chassis.
With the controller positioned at the front of the unit, reading the display and quick checks are easy for the driver. The unit is approved to function as lateral protection. This means the unit can be placed on the outermost position on the chassis. As a result the unit ground clearance is maximised, reducing the chance of damaging the unit.
With the controller positioned at the front of the unit, reading the display and quick checks are easy for the driver. The unit is approved to function as lateral protection. This means the unit can be placed on the outermost position on the chassis. As a result the unit ground clearance is maximised, reducing the chance of damaging the unit.
Thanks to the increased oil sump, containing 13,5 litres of oil (15W40), the maintenance interval is reduced to once every 1.000 hours, or once a year. The unit is designed in a way that the full service can be done without dismounting the unit form the chassis. The 4-cylinder Yanmar engine provides 18,9 kW which is equal to 25,7 hp at 1.500 rpm or 50 Hz, making our unit Stage 5 compliant.
Read more about the technical specifications here.
